How to Install a Car Seat Properly

The main reason car seats are so hard to install is1. Guide the shoulder belt through the proper slots
the wide variety of cars and car seats. There areon the safety seat.
so many choices that even if you know how to2. Buckle the seat belt on the other end and
install the safety seat in one car, you may install itmake sure that the car seat is at an approximate
wrong in another.45-degree angle.
Follow these guidelines and you will get the3. You're done!
installation right every time:o Make sure you buyInstall the forward facing toddler seat (Latch
the right car seat for your child. For example,install):
each safety seat should have a user's manual and1. As with the infant seat, take the clips and latch
a guide that tells the parent the maximum weightthem to the anchors in between the back cushion
for the car seat. Use this guide to choose theand the seat cushion.
right seat.o Find a convenient spot in the rear of2. Take the tether from the top of the seat and
your car to install the seat. The middle rear seatclip it to the anchor near the back window. Not all
is usually the safest, but some cars do not havecars will have this anchor.
latches in the middle. Never install a car seat in the3. You're done!
front seats.Installing the forward facing toddler seat (seat belt
Installing the rear facing infant seat (latch install):install):
1. Take the clips from the car seat's base and clip1. Slide the seat belt through the seat belt path.
them to the anchors buried between the back2. Buckle the seat belt on the other end.
and seat cushion.3. You're done!
2. Pull the straps tight and make sure the seat isBe sure to check that the seat is secure after
level. Some child seats come with a meter on theinstallation.
side to tell you whether it is level or not.Although the steps may sound simple, many
3. You're done!people still install them incorrectly. Follow these
Installing the rear facing infant seat (seat beltsteps and you can be a little less worried while
install)driving.